Seized sump nut.

Honest John Back Room » The Back Room Archive
Thu 6 Dec 2001 21:53  Back Top End
Re: Seized sump nut. - peter todd
when I went to school & did metalwork (resistant materials nowadays!) you had to let copper cool naturaly to anneal it?

and as for alwyn's new sump because the brazed insert twisted out, whats wrong with brazeing it back in, or cleaning it up & welding it in if its steel? I give up, what ever happened to the old ways? give me bakers fluid & a stick of tinmans solder, a leaking brass rad, gas torch & soldering iron any day!!

must go, medicine trolleys coming................
Reply | Report as offensive | Link
 Messages Author Date
Seized sump nut.  Stu Wed 5 Dec 2001 18:41
Re: Seized sump nut.  Rob Wed 5 Dec 2001 18:51
Re: Seized sump nut.  David W Wed 5 Dec 2001 19:04
Re: Seized sump nut.  prm Wed 5 Dec 2001 19:07
Re: Seized sump nut.  Alwyn Wed 5 Dec 2001 20:03
Re: Seized sump nut.  'ungry 'orace Wed 5 Dec 2001 23:59
Re: Seized sump nut.  pugugly Wed 5 Dec 2001 19:07
Re: Seized sump nut.  Julian Lindley Wed 5 Dec 2001 19:25
Re: Seized sump nut.  Don Wed 5 Dec 2001 19:57
Re: Seized sump nut.  alvin booth Wed 5 Dec 2001 21:22
Re: Seized sump nut.  peter Wed 5 Dec 2001 22:09
Re: Seized sump nut.  Darcy Kitchin Wed 5 Dec 2001 22:23
Re: Seized sump nut.  steve paterson Wed 5 Dec 2001 22:29
Re: Sealing washers  Andrew T Wed 5 Dec 2001 23:21
Re: Sealing washers - 1st Year metalwork  rg bhaji Thu 6 Dec 2001 12:12
Re: Sealing washers  Brian Wed 5 Dec 2001 23:41
Re: Seized sump nut.  Richard Hall Thu 6 Dec 2001 00:35
Re: Seized sump nut.  peter Thu 6 Dec 2001 19:19
Re: Seized sump nut.  peter todd Thu 6 Dec 2001 21:53